Zastone D9000 Programming Software ((top)) -

Click This pulls the factory default settings and ensures the software is communicating correctly with your hardware. 3. Entering Data You can now fill out the spreadsheet-style interface: Frequency: Enter the RX and TX frequencies. Offset: Set the + or - for repeater shifts.

Apply the necessary CTCSS or DCS tones to open local repeaters. zastone d9000 programming software

Zastone typically provides the software via their official website or included mini-CDs. However, since manufacturer sites can sometimes be difficult to navigate, many enthusiasts turn to: Click This pulls the factory default settings and

Connect your cable to the PC before opening the software. Go to your and ensure the cable is recognized under "Ports (COM & LPT)." Note the COM port number (e.g., COM3). 2. Reading from the Radio Always "Read" from the radio before you start typing. Turn on the D9000. Connect the cable to the radio. In the software, select the correct COM port. Offset: Set the + or - for repeater shifts

Easily import repeaters from databases like RepeaterBook.

Ensure the cable is pushed firmly into the radio. The D9000 jacks can sometimes be tight. Final Pro-Tip