: To bridge the connection during the initial setup. Network Details : Your local Wi-Fi name (SSID) and password. Software : The Diagnostic Tool and Standard Drivers . Option 1: Connecting to Your Wi-Fi Network (STA Mode)
: Open the Diagnostic Tool (e.g., version 1.028). Set the interface to USB and click Get Status . The indicator should turn green if the connection is active.
: Click Set to save these settings to the printer's memory. You can now disconnect the USB cable. Option 2: Using Wi-Fi Direct (AP Mode) xprinter xp420b wifi setup
: On your mobile device or laptop, search for available Wi-Fi networks and select the one named after your printer (e.g., XP-420B ). Default Password : Use the default password 12345678 .
: Click Get to see the assigned IP address (the default is often 192.168.1.110 ). For long-term stability, it is recommended to set a Static IP in the configuration settings. : To bridge the connection during the initial setup
: Go to the Configuration Page or Wi-Fi tab. Click Scan to find available wireless networks.
: Use the USB cable to connect the printer to your Windows PC and turn the printer on. Option 1: Connecting to Your Wi-Fi Network (STA
This is ideal for single-user scenarios or when a local router is unavailable.