Ensure the drive is formatted correctly to FAT32. Some larger or high-speed USB 3.0 drives may not be recognized by the box's older hardware.
While over-the-air (OTA) broadcasts are typically in 1080i or 720p, the AT-163 is designed to up-convert signals to 1080p for better display on modern monitors.
Plug the USB drive into the port on the front of the AT-163. viewtv at163 firmware update exclusive
First, try different HDMI cables if possible. Probably isn't the problem, but sometimes it is, and if so it's a pretty simple fix. ViewTV AT-163 - AVS Forum
If you encounter problems during or after the update, consider these solutions: Ensure the drive is formatted correctly to FAT32
Select the file from the drive and confirm. the device during this process, as it could result in a "brick" or boot loop. Troubleshooting Common Update Issues
Note: Always verify the model number on your box's label to avoid flashing incompatible software. Plug the USB drive into the port on the front of the AT-163
Navigate to the or About menu using your remote control. Select Software Update and then USB Upgrade .