Try a different USB cable or port. If the device is totally "brick," you may need to research "shorting pins" on the controller to force it into Test Mode, though this is a last resort. Conclusion
To verify your controller, download a tool like or Flash Drive Information Extractor . Look for: Controller: SSS6698-BA / TC58NC6623 Flash ID: (e.g., Toshiba, SanDisk, or Hynix memory chips) Step 1: Finding the Right MPTool Version
Always use a USB 2.0 port (usually black) on the back of your motherboard. USB 3.0 ports and front-panel hubs often cause timing issues during the flash process. tc58nc6623 sss6698ba mptool fixed
Select the correct BIN file (Firmware) and ISP (In-System Programming) file for your specific Flash ID. Most MPTools have an "Auto" setting, but if that fails, you must manually match the Flash ID found in ChipGenius to the configuration list in the tool. Set the Capacity to "Auto" and ensure "Format" is checked. Step 4: The Flashing Process Once configured, hit the Start button.
It will cycle through "Erase," "Write ISP," and "Format." Try a different USB cable or port
Click on (or Edit). If prompted for a password, it is usually left blank or is admin .
Not every MPTool version supports every NAND flash type. For the SSS6698BA, you generally want to look for: (or higher) 3S_USB_MPTool_v2.444 Look for: Controller: SSS6698-BA / TC58NC6623 Flash ID: (e
Here is a deep dive into how to use the to bring your dead flash drive back to life. Understanding the Hardware