Startimes Software Upgrade Top [2021] -

: Turn off your decoder using the remote, then remove the power supply for 1–2 minutes.

If your upgrade fails or your decoder isn't working correctly afterward, try these common fixes: How To Run A Software On FTA Decoder

Select (if available) to scan for the latest broadcast-delivered firmware. 3. USB Software Upgrade (Advanced) startimes software upgrade top

Most StarTimes decoders are designed to update automatically when a new version is released.

If the automatic prompt does not appear, you can check for updates through the settings. Press the button on your remote. Navigate to Settings and press OK. Look for Decoder Information or System Settings . : Turn off your decoder using the remote,

There are two primary ways to upgrade your decoder: automatically (via the broadcast signal) or manually (using a USB drive or via the menu). 1. Over-the-Air (OTA) Automatic Update

Press to begin. The decoder will show "Successful" and reboot upon completion. Troubleshooting Common Upgrade Issues USB Software Upgrade (Advanced) Most StarTimes decoders are

For persistent system errors like "Auto Rebooting," a manual USB upgrade might be necessary.

: Press OK on your remote to start the download. Ensure you do not turn off the power during this process to avoid damaging the device. 2. Manual Menu Upgrade

: You must download the specific firmware file for your exact model (e.g., Master Plus) onto a clean USB drive. Installation : Insert the USB into the decoder port. Go to Menu > Settings or External Devices . Select File Manager and locate the software file (.bin).