#include #include #define SS_PIN 10 #define RST_PIN 9 MFRC522 mfrc522(SS_PIN, RST_PIN); void setup() { Serial.begin(9600); SPI.begin(); mfrc522.PCD_Init(); Serial.println("Scan a card in Proteus..."); } void loop() { if ( ! mfrc522.PICC_IsNewCardPresent()) return; if ( ! mfrc522.PICC_ReadCardSerial()) return; // Show UID on Virtual Terminal Serial.print("Card UID:"); for (byte i = 0; i < mfrc522.uid.size; i++) { Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "); Serial.print(mfrc522.uid.uidByte[i], HEX); } Serial.println(); } Use code with caution. Testing the Simulation
Once your circuit is wired, you need to upload the Hex file to your Arduino. Use the standard MFRC522.h library in the Arduino IDE. rc522 proteus library updated
Integrating an into your Proteus simulations can be a headache because the software doesn't include it in the default library. Finding an updated RC522 Proteus library is the first step toward prototyping contactless systems like door locks, attendance trackers, or inventory managers without needing physical hardware. #include #include #define SS_PIN 10 #define RST_PIN 9
SPI simulations can be CPU-intensive. Try reducing the "Animation Sampling Rate" in System Settings. Use the standard MFRC522
Inability to "present" a virtual RFID card to the reader.