Media Converter In Cisco Packet Tracer Link May 2026

Select the Copper Straight-Through cable (solid black line). Connect a PC to a FastEthernet or GigabitEthernet copper port on the switch.

Ensure both ends of the fiber cable are plugged into Fiber/SFP modules. You cannot plug a fiber cable into an RJ45 port. media converter in cisco packet tracer link

In the physical world, a is a simple networking device that connects two different media types—most commonly copper twisted-pair (Ethernet) and fiber optic cabling. They are essential when you need to extend a network link beyond the 100-meter limit of standard copper Ethernet or when integrating legacy equipment with modern fiber backbones. Select the Copper Straight-Through cable (solid black line)

Select the Fiber cable (orange dashed line). Connect the SFP/Fiber port of your switch to another fiber-enabled device (like a Server or another Switch with a fiber module). Key Scenarios for Using Media Conversion You cannot plug a fiber cable into an RJ45 port

To create a link that acts as a media converter between two different cable types, follow these steps using a standard Cisco Switch (like the or 3560 ). 1. Select the Hardware Open Cisco Packet Tracer .

If your media converter link shows a (down status), check the following: