Use an anti-static mat when opening the ECU case to avoid damaging the CMOS components.
Always double-check the connector numbering. Looking at the ECU pins versus looking at the harness plug can lead to mirrored connections. me7.4.5 pinout
To communicate with the ECU on the bench using tools like KESS, K-Tag, or Autotuner, you need to establish a minimum set of connections: Power, Ground, and Data. 1. Power and Ground Pin G1 (32-Way Grey Connector) 12V Ignition (Terminal 15): Pin F4 (32-Way Grey Connector) Ground (Terminal 31): Pin H4 (32-Way Grey Connector) 2. Communication Lines (CAN Bus / K-Line) Use an anti-static mat when opening the ECU
To put the ST10F275 into boot mode, you often need to ground a specific pin through a resistor (usually 1k Ohm) while powering up the unit. Common Applications You will find this ECU in: Peugeot: 206, 207, 307, 308, Partner (1.6 16V engines). Citroën: C2, C3, C4, Berlingo (1.6 16V engines). Safety Precautions To communicate with the ECU on the bench