Lenel Lnl3300m5 Installation Manual Upd Top (FRESH · 2025)

Before replacing an existing controller, ensure all database records from the legacy system are backed up.

Primary Ethernet (10/100 Mbps) and two RS-485 ports. lenel lnl3300m5 installation manual upd top

Typically used for communication speed settings. Before replacing an existing controller, ensure all database

Connect the existing M5 reader interface boards to the RS-485 ports (Port 1 and Port 2). Ensure proper termination if the LNL-3300-M5 is at the end of the communication line. 4. Configuring DIP Switches Connect the existing M5 reader interface boards to

Once the hardware is powered and wired, you must add it to the OnGuard interface: Open . Navigate to the Access Control tab and select Panels . Add a new panel and select LNL-3300 as the type. Enter the IP Address assigned to the controller.

Connect a standard Cat5e/6 cable to the RJ45 port for communication with the OnGuard server.

This guide covers the essential steps for a successful installation and initial configuration. 1. Hardware Overview and Specifications

Before replacing an existing controller, ensure all database records from the legacy system are backed up.

Primary Ethernet (10/100 Mbps) and two RS-485 ports.

Typically used for communication speed settings.

Connect a standard Cat5e/6 cable to the RJ45 port for communication with the OnGuard server.

This guide covers the essential steps for a successful installation and initial configuration. 1. Hardware Overview and Specifications