The installation manual provides detailed pinout diagrams for the primary rear connector. Key wiring tasks include:
: Technicians must ensure the address matches the aircraft's official registration database. 🔍 Post-Installation Checkout
The KT 70 is designed for standard panel mounting within the Silver Crown Plus product line. Specification 11.0 to 33.0 VDC (Compatible with 14V and 28V systems) Current Draw 35 Watts maximum Output Power 200 Watts peak pulse minimum Weight 3.90 lbs (1.77 kg) Dimensions 1.63" H x 6.25" W x 10.0" L Certification TSO C112 (Mode S) 🏗️ Mounting and Wiring Kt 70 Installation Manual
: Heavy-gauge wire is recommended to handle peak pulse loads.
: Must be connected to a compatible blind encoder (like the KEA 130A) or an encoding altimeter via a Parallel Gray Code (Gillham) interface. Specification 11
: The manual describes how to set the specific aircraft address using a dedicated programming module or hard-wiring specific pins.
The (Part Number 006-00673-XXXX) is the definitive technical resource for avionics technicians installing or maintaining the KT 70 Mode S transponder. This manual covers everything from physical mounting to complex Mode S address programming. 🛠️ Installation Specifications The (Part Number 006-00673-XXXX) is the definitive technical
: An optional remote "Ident" switch can be wired to the yoke for pilot convenience. 🛰️ Mode S Programming