: Use the back of the housing as a template to mark and drill your mounting holes.
: Use the security hex wrench to remove the two security screws from the tech lock cover plate located below the keypad.
: Insert the Tech Key into the tech lock and turn it counter-clockwise to loosen and remove the lock, allowing the faceplate to be removed. 2. Hardware Installation & Mounting knox keysecure 3b installation manual hot
: You will need a Tech Key (Technician Access Key) and a specialized tamper-proof security hex wrench , typically provided by Knox .
: Secure the housing using at least four Grade 5 or Grade 8 fasteners (e.g., 3/8" diameter carriage bolts). 3. Electrical Installation : Use the back of the housing as
: Ensure the unit is properly grounded to the vehicle chassis or building ground.
The is a rugged, high-security master key retention system designed primarily for fire apparatus and emergency response vehicles. It ensures that master keys are only accessible to authorized personnel using a specific PIN code. 1. Preparation and Hardware Disassembly flat surface within the vehicle.
The KeySecure 3b can be mounted in a vehicle or surface-mounted to an interior wall.
Before mounting, you must disassemble the unit to access the internal mounting holes.
: Choose a sturdy, flat surface within the vehicle.