Kes Geyser Load Control Timer Manual New | LIMITED – Fix |

The device features three primary LED status indicators and four preset profiles: Indicates the mains power is ON. Red LED: Indicates the geyser itself is ON and heating.

If the Blue LED is flashing but the Red LED never turns on, check if you are currently in a "Peak Time" lockout or if you have accidentally selected Program 3 (Always Off) . kes geyser load control timer manual new

The override typically lasts for one hour (or until the next programmed event). The device features three primary LED status indicators

The unit can be mounted on a DIN Rail inside your DB or a surface-mounted enclosure. Wiring: Connect the Live (L) input from the geyser circuit breaker. Connect the Neutral (N) wire from the DB's neutral bar. The override typically lasts for one hour (or

The KES ISG1201 includes four factory-set profiles. To select a program, use the button to cycle through them. Blue LED Pattern Function & Operating Hours Prog 1 1 flash / second