Connect this to Pins 5 and 7 . If your case doesn't have a reset button, leave these pins empty.
Some Foxconn boards made for HP or Dell use a 13-pin or 14-pin layout. If your header is larger than 9 pins, you likely have an OEM-specific board that requires a different map. Safety Tips
Always remove the power cord before touching the motherboard pins. foxconn n15235 motherboard front panel connectors updated
Are there any printed in white ink near the RAM slots or the center of the board? How many total pins are in your front panel section?
To make sure we get this exactly right for your specific build, could you tell me: Connect this to Pins 5 and 7
LEDs are polarity sensitive. If the HDD or Power light doesn't work, power down and flip the small 2-pin connector 180 degrees.
If your motherboard has a 10-pin header with one pin missing (Pin 9), use this universal mapping. Note that for LEDs, the colored wire is usually positive (+) and the white or black wire is negative (-). Pin Number Assignment HDD LED Hard Drive Activity Light (Pin 1 is +) Pin 2 & 4 Power LED Power Indicator Light (Pin 2 is +) Pin 5 & 7 Reset SW Reset Button (Polarity doesn't matter) Pin 6 & 8 Power SW Power Button (Polarity doesn't matter) Pin 9 Empty No pin (Key) Pin 10 NC Not connected Step-by-Step Connection Guide If your header is larger than 9 pins,
The most common layout is a (two rows of pins with one pin missing at the end). Standard Foxconn 9-Pin Layout