Firstchip Mptools V1.0.4.3 Fc1178 Fc1179 -

Insert your corrupted USB drive. The software should automatically detect it in one of the numbered slots.

Try a USB 2.0 port instead of USB 3.0. Front-panel PC ports often provide unstable voltage; use the ports directly on the motherboard.

Fixes "Fake Capacity" drives or drives showing incorrect storage sizes. Firstchip Mptools V1.0.4.3 Fc1178 Fc1179

These usually indicate a physical NAND failure. If MpTools cannot communicate with the memory chip despite multiple attempts, the hardware may be physically dead. Conclusion

To confirm your drive uses the FC1178 or FC1179 controller, download a utility like or Flash Drive Information Extractor . If the "Controller" field matches Firstchip FC1178/FC1179, you are ready to proceed. 2. Configure the Software Insert your corrupted USB drive

Do not unplug the drive during this process, as it can permanently "brick" the hardware. Common Troubleshooting

The progress bar will turn yellow during the "Scanning" phase and green once the "Flash" is complete. Front-panel PC ports often provide unstable voltage; use

Recovering Your USB Drive: A Guide to Firstchip MpTools V1.0.4.3 (FC1178/FC1179)