Ezviz Downgrade Firmware - Free [updated]

After a successful downgrade, it is vital to disable "Auto-Update" in the EZVIZ mobile app settings. If left on, the camera will likely reinstall the problematic newer version overnight. Downgrading is a powerful way to regain control over your hardware, provided you use the correct files and maintain a stable connection throughout the process.

If the camera is stuck in a boot loop and cannot be reached by EZVIZ Studio, you may need to use a TFTP (Trivial File Transfer Protocol) server. This tool "forces" the firmware onto the camera during the initial seconds of its boot-up sequence. You place the firmware file in the TFTP root folder, set your PC's IP address to a specific static range (usually 192.0.0.128), and power on the camera. The camera will automatically look for the server and pull the firmware. Final Considerations ezviz downgrade firmware free

An Ethernet cable connection is highly recommended over Wi-Fi for stability. Finding the Correct Firmware After a successful downgrade, it is vital to

A Windows PC connected to the same local network as the camera. If the camera is stuck in a boot

EZVIZ devices are built on Hikvision architecture, which means they often share similar recovery protocols. A downgrade is essentially a manual firmware flash. Unlike a standard "Over-the-Air" (OTA) update, this process requires a direct connection between your computer and the camera to push the older software version. Preparation and Prerequisites