Create account
Race results
Substackis where we regularly publish news, articles and announcements of new features around RaceClocker. You can sign up to receive news in email.Create account 
Log inRaceClocker is free up to 10 participants per race. If you want to use it with more features you can upgrade at any time to RaceClocker Essentials or Premium. Have alook at our pricing.
Setting up a Crawford CDM9 operator with an ECS 950 control box requires a precise sequence of mechanical assembly and electronic configuration to ensure safe and efficient industrial door operation.
The door will then move slowly by impulse operation to the floor and reverse to the fully open position to set the limit points.
: If major repairs are needed for the electro-motor, sliding clutch, or main relays, official documentation often recommends replacing the complete operator to meet modern safety standards.
: The operator should be installed at least 2.5 meters above the floor for safety. Electronic Setup and Commissioning (ECS 950)
: Turn the installation switch ( SW1 ) to the ON position. Calibration : Mark a "1m position" on the door frame.
The ECS 950 control unit uses several internal cards, including the (standard functions) and the manoeuvring card , which features status LEDs for the stop circuit and limit switches.
Setting up a Crawford CDM9 operator with an ECS 950 control box requires a precise sequence of mechanical assembly and electronic configuration to ensure safe and efficient industrial door operation.
The door will then move slowly by impulse operation to the floor and reverse to the fully open position to set the limit points.
: If major repairs are needed for the electro-motor, sliding clutch, or main relays, official documentation often recommends replacing the complete operator to meet modern safety standards.
: The operator should be installed at least 2.5 meters above the floor for safety. Electronic Setup and Commissioning (ECS 950)
: Turn the installation switch ( SW1 ) to the ON position. Calibration : Mark a "1m position" on the door frame.
The ECS 950 control unit uses several internal cards, including the (standard functions) and the manoeuvring card , which features status LEDs for the stop circuit and limit switches.
English
Log in
