If parameters become corrupted, you can often initialize the drive. For similar Convo series, this is typically done via parameter b-11 set to 1.

If the inverter fails to operate, check the following common issues:

Ensure no RC absorbing devices (capacitors or varistors) are connected to the output terminals, as these can damage the inverter.

is engineered for efficiency and reliability in demanding environments.

The inverter is on but has no frequency command.

Connect the single-phase power supply to L and N (or R and T) terminals. Output to the motor is via U, V, and W. Control Terminals: S1-S5: Multi-function digital inputs.

The unit should be installed in a well-ventilated area, free from direct sunlight and corrosive gases, at an altitude below 1,000 meters. Mounting: Designed for wall-mounted installation. Terminal Wiring:

Includes a built-in PID controller, braking unit, and a removable operation panel for remote control capabilities.

Proper installation is vital for the longevity of the drive and the safety of the operator.

Maximum output frequency up to 300 Hz with a carrier frequency ranging from 1.5 kHz to 15 kHz.