Cobra 3195 Alarm Manual - Full ((full))

: When the LED goes out, turn the ignition ON and count the flashes until they match the first digit of your 4-digit PIN . Turn the ignition OFF, then back ON to enter the next digit. Repeat for all four digits.

: Press and hold both buttons on the new remote for about 10 seconds until its LED stops flashing and stays on.

If your remote fails or the battery is flat, you can disarm the system using the (a small black "torpedo" or "stick" fob) by touching it against the dashboard receptacle. Alternatively, you can use the ignition-based PIN entry method described above to override the immobilizer. Cobra Alarm Fob - Midlands Lotus Owners Club (MLOC) cobra 3195 alarm manual full

: Press the small button (often "B") to unlock doors and deactivate the system. Indicators flash once, and the LED goes off.

The is a vehicle security system designed to provide comprehensive protection through perimetric and volumetric sensing. While specific digital manuals for the "3195" model are often grouped with similar legacy units like the 3198 or 3193, they share a core architecture for arming, emergency overrides, and remote programming. Core System Functions : When the LED goes out, turn the

The system is operated primarily through a two-button radio control (fob):

: Press the large button (often "A") to lock doors and activate security. The turn indicators will flash twice, and the LED will illuminate. : Press and hold both buttons on the

: To leave a pet or person inside, you can disable the ultrasonic volumetric sensors by pressing the arm button twice within 20 seconds of locking the vehicle. Programming New Remotes

: Turn the ignition ON and OFF three times within seven seconds. The dashboard security LED will light up for three seconds.

If you need to add or resynchronize a key fob, follow this standard Cobra sequence: