If prompted for a password (), the default is typically 22 for configuration access.
The RITCUSRG02 uses two levels of parameters: (frequent) and Type C (configuration/password-protected). Accessing Parameters: Press SET for more than 3–5 seconds to enter the menu. carel ritcusrg02 manual
By default, the display shows the temperature from the primary probe (B1). Changing the Set Point: Press the SET button briefly. Use the UP and DOWN arrows to adjust the desired value. Press SET again to confirm and save. If prompted for a password (), the default
After modifying values with the arrows, you must press SET for at least 3 seconds to definitively save the new settings. If no button is pressed for 60 seconds, the device will exit without saving (timeout). Installation manual - Tempatron By default, the display shows the temperature from
Below is a guide to its primary functions, installation requirements, and programming steps based on official Carel documentation.
Store and operate the device within the specified temperature and humidity limits to prevent internal condensation or damage to plastic components. 3. User Interface & Basic Operation
The controller features a bright and a simple keypad for adjustments.