Biosystems Bts 350: User Manual
Check the aspiration volume. If the volume is inconsistent, inspect the peristaltic pump tubing for wear or "memory" flat spots. 5. Troubleshooting Common Error Codes
The user interface is menu-driven. To program a new technique:
Allow the unit 10–15 minutes to reach the programmed temperature (usually 37°C for most enzymes). 3. Programming and Running Assays biosystems bts 350 user manual
Whether you are a laboratory technician setting up a new unit or a manager ensuring compliance, understanding the core components of the user manual is essential for accurate diagnostics. 1. System Overview and Technical Specifications
Enter the wavelength, aspiration volume, and factor (or standard concentration). Check the aspiration volume
Always run a fresh standard or calibrator when switching reagent lots. 4. Routine Maintenance (The "Golden Rules")
Check for a blockage in the intake needle or a leak in the peristaltic pump tubing. Conclusion Troubleshooting Common Error Codes The user interface is
Wash the flow cell with distilled water after every work session. Never leave reagents or serum sitting in the tubing overnight.
Capable of storing up to 150 techniques and 2,000 results. 2. Initial Setup and Installation
Use distilled water to prime the aspiration system. This ensures no air bubbles are trapped in the flow cell, which is the most common cause of "noisy" readings.
