Autocraft Battery Charger Ac-60cr Manual May 2026

Once the battery is fully charged (often indicated by a green LED or a meter needle dropping to zero), unplug the AC cord first, then remove the chassis clamp, and finally the positive clamp. Essential Safety Warnings YouTube·Homeowner Repair How To Use A Battery Charger On Your Vehicle

Connect the clamp to a grounded part of the vehicle's chassis, away from the battery and fuel lines, to minimize spark risk.

Supports both 6V and 12V lead-acid batteries. autocraft battery charger ac-60cr manual

Features built-in safeguards against short circuits, overcharging, and reverse polarity (protecting the unit if clamps are accidentally swapped). Operating Instructions: Step-by-Step Follow these steps to ensure a safe and effective charge:

Set the voltage switch (6V or 12V) and the charge rate (2A or 6A) based on your battery type. Once the battery is fully charged (often indicated

Automatically adjusts the charging rate to prevent overcharging and extend battery life.

Turn off all vehicle accessories and keep the hood open for ventilation. Turn off all vehicle accessories and keep the

Connect the charger’s AC power cord to a grounded 120V outlet.