Alcor Recovery Tool _verified_ Site

Click the Start (S) button. The tool will begin a "Low-Level Format." It will scan for bad blocks, re-write the firmware, and create a fresh partition.

The Alcor Recovery Tool is a universal fix. It only works if your USB drive contains an Alcor Micro chip (e.g., AU6981, AU6983, AU6989, etc.). Using the wrong software on a different controller (like Phison or Silicon Motion) can permanently "brick" the device. alcor recovery tool

Once you have confirmed you have an Alcor chip, follow these steps: Click the Start (S) button

The tool should automatically detect your drive in one of the numbered "slots" on the interface. If it shows a yellow or green box, it has recognized the hardware. It only works if your USB drive contains

Most users should stick to the default settings. However, you can click "Setup" (password is usually blank) to adjust the "Scan Level" or "ECC" settings if the drive is heavily corrupted.

You should reach for this tool if your USB drive exhibits the following symptoms: