Alcor Micro Unknown Fa00 - F W 3613 «Web Ultimate»

Note down the (Vendor ID) and PID (Product ID)—usually 058F and 6387 for Alcor. Step 2: Download the Correct Alcor MPTool

This is the controller ID. It tells the software which instruction set to use.

If the tool doesn't see your drive, go to "Setup" and ensure the VID/PID matches what you found in Step 1. alcor micro unknown fa00 - f w 3613

You cannot use a standard Windows format tool for an FA00 error. You need the Alcor Micro Production Tool.

This is the firmware version currently flashed onto the controller. If this is appearing as "Unknown," it means the firmware is corrupted or the software version you are using is too old to recognize it. Step 1: Identify Your Exact Chipset Note down the (Vendor ID) and PID (Product

This is the primary reason people seek F/W 3613 tools. The MPTool is the only way to reset the "read-only" flag triggered by the controller's safety firmware.

To fix this, you generally need to perform a "low-level format" using the specific Alcor Micro Production Tool (MPTool) designed for this chipset. Understanding the Hardware If the tool doesn't see your drive, go

Look for versions released after the date of your F/W 3613 (typically versions from 2013-2015 or newer).

Look for the (e.g., AU6989SN, AU6998) and the Flash ID Code .

Before downloading tools, you must confirm the hardware details. Using a generic formatter can permanently "brick" the drive.