The cable connecting the front ports to the motherboard has wiggled free.
The most frequent fix is simply ensuring the cable is plugged in. Power down the PC and unplug the power cord. Open the side panel. Locate the "F_AUDIO" or "Yellow" header on the motherboard. 917-front audio not connected
💡 If you are performing a "sleeper build" or moving an HP board to a new case, look for the "Front Audio Header Adapter for HP" online. It bridges the specific pins required to bypass the 917 error automatically. To help you get past this error quickly, tell me: The model of your PC (e.g., HP EliteDesk 800 G2). If you recently moved the motherboard to a new case. If you actually need to use those front audio jacks. The cable connecting the front ports to the
Unplug the cable, check for bent pins, and firmly plug it back in. 2. Check for "Sense" Pin Compatibility (Case Swaps) Open the side panel
Note: Some HP models do not allow you to disable this specific error check; in those cases, a physical jumper is required. 4. Clear the CMOS
The onboard audio is enabled, but the system isn't seeing the physical I/O. Step-by-Step Solutions 1. Reseat the Internal Connection
If you don't use the front audio ports and want the message gone: Restart the PC and tap to enter BIOS Setup. Navigate to Advanced > Device Options . Look for Front Panel Audio and set it to Disabled .